Side Mount Canopy Air Vent with Filter & 12V Fan - Aluminium

DETAILS 

The Rogue Canopies Side Mount Air Vent with Filter and 12V Fan is a bolt-on system that provides clean airflow and ventilation while restricting dust and water ingress. It's bolt-on design allows for easy universal fitment to canopies, toolboxes, caravans and cavities that require ventilation. These vents are often paired with our front mount vent kits, which are used for passive air intake from the front of the canopy.

Having a fan fitted to the vent allows you to extract hot air from inside while the vehicle is stationary helping to improve circulation and ventilation.

THE FAN

The included fan is not your typical 12V computer fan, its a DR (Dust Resistant) Maglev high-flow 150CFM unit which provides better resistance to dust invasion. DR Maglevs one-piece structure provides a better sealed bearing system for improved fan life.

The S & C (Seal and Clip) design strengthens the locked position of both the motor and stator from moving due to temperature changes, this allows the product to be more stable and run longer. 

The vent will come disassembled and ready for fitment so the fan can be oriented to either pull air in, or push air out prior to installation. 

THE FILTER

The included filter prevents fine dust while allowing clean air to flow through. You can remove the filter by un-bolting and removing the filter housing. For the best ongoing performance we recommend checking your filters every 6-12 months or more frequently if exposed to dusty conditions. 

OFTEN PURCHASED WITH:

• Front Mount Vent
• Front Mount Vent with 12V Fan
• Side Mount Vent (no fan)
• Spare Filter Pack
• Spare Filter 2-Pack

SPECIFICATIONS

VENT SPECIFICATIONS

• Material: Aluminium 
• Finish: Raw finish Aluminium (Also available in black)
• Vent weight without fan: 700g (0.7kgs)
• Vent weight with fan: 950 (0.9kgs)
• Dimensions: 200mm wide x 170mm high x 40mm deep. The external covers measure 13mm off the surface they are mounted to.
• Made in Australia

FAN SPECIFICATIONS

• Model: PMD1212PTB1-A
• Overall Size: 120mm x 120mm x 25mm 
• Voltage: 12VDC
• Input Power: 12W
• Speed: 4500 RPM
• Air Flow: 150CFM
• Noise: 54dBA
• Bearing Type: Precision Ball bearing system
• Connection Type: F/Lead
• Frame Material: Thermoplastic
• Sunon Part No.: PMD1212PTB1-A
• Operating temperature: -10 - +70 deg. C
• Storage temperature: -40 - +70 deg. C
• Fan Weight: 220g

 PACK CONTENTS

1x Bolt-on Air Vent, consisting of;

• 1x Front Intake Cover
• 1x Louvered Vent Plate
• 1x Rear Filter Housing
• 1x Air Filter
• 1x Sunon 12V DC Fan
• 1x Wire fan finger guard
• Stainless steel assembly & fitting hardware

FITTING INSTRUCTIONS

You can find the fitting instructions in the photos within this listing. 

Notes: The photos showing the vent fitted to a canopy are a non-bolt on design that these vents are based off,  so while the concept is the same for these bolt-on units, the difference is that the louvered panel will also be bolted onto the front under the external cover. 

DISCLAIMER

These vents have been designed to work on the side of a canopy/camper/caravan and we do not recommend them to be mounted on the front, back or roof of your canopy. We do have a front/rear mount option available if that is where you intend to mount them. If these are mounted to your canopy door, we do not recommend leaving your door open during heavy rain. Please take care when washing your vehicle not to spray water into your vent.