Kings Upright Fridge Fan Kit

KINGS FRIDGE FAN BRACKET

This kit mounts a 92mm 12V fan into your fridge to circulate cold air from the freezer throughout the fridge, improving the cooling performance. 

Available in a raw aluminium finish or powder coated white.

Suits Kings 85L Upright fridges. We also make a bracket compatible with the Bushman 85L & 130L fridges, see link below. 

Please note that the fan cutout is no longer circular as shown in the photos, but is now a punched octagonal cut-out. This does not reduce the performance and was done to save manufacturing time to provide a lower cost solution. 

PACK CONTENTS

• 1x 2mm aluminium Fan bracket with double-sided tape for fitment
• 1x 12v Fan 92mm 
• 1x Wire fan finger guard
• Hardware to mount fan to bracket. 

INSTALLATION

Note: The bracket mounts to the fridge using double sided tape which is included in the kit. 

1. Before fitting the bracket to the fridge, we recommend that you test the fan on your power source.
2. Fit the fan and finger guard to the aluminium bracket using the hardware supplied, with the non-stickered side of the fan facing forwards and the wiring best positioned for connection to your power source.
3. Unplug the fridge and leave until room temperature, then wipe down the surface with a clean dry cloth.
4. Connect the fan to your power source: Please note that we do not provide wiring instructions, diagrams or advice, we recommend using an auto electrician for the electrical connection.
5. Remove the double sided tape backing, position unit between the right hand side of fridge and freezer as shown in the photos.  Press firmly into place and keep pressure on it for approx. 30 seconds. We recommend leaving the fridge turned off for a couple of hours to let the tape set. 

OFTEN PURCHASED WITH:

Rogue Fan Switch
Canopy vents 
Canopy vents with 12V fans
Bushman Fridge Mounting Enclosure with fan mounts 

DISCLAIMER 

Please note that installing this product and modifying your fridge may void your fridges warranty, and we take no responsibility for any claims, issues or damage you may incur as a result. We do not provide electrical wiring instructions, diagrams or advice, and we recommend using a licensed professional to connect the fan to your power source.